Enterasys Networks 9034313-07 manual This example shows how to display Sntp client settings

show sntp

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

Example

This example shows how to display SNTP client settings:

C3(su)->show sntp

SNTP Version: 3

Current Time: TUE SEP 09 16:13:33 2003

Timezone: 'EST', offset from UTC is -4 hours and 0 minutes

Client Mode: unicast

Broadcast Count: 0

Poll Interval: 512 seconds

Poll Retry: 1

Poll Timeout: 5 seconds

SNTP Poll Requests: 1175

Last SNTP Update: TUE SEP 09 16:05:24 2003

Last SNTP Request: TUE SEP 09 16:05:24 2003

Last SNTP Status: Success

SNTP-Server Precedence Status

-------------------------------------------

10.2.8.6	2	Active
144.111.29.19	1	Active

Table 14‐7 provides an explanation of the command output.

Table 14-7 show sntp Output Details

Output Field	What It Displays...
SNTP Version	SNTP version number.
Current Time	Current time on the system clock.
Timezone	Time zone name and amount it is offset from UTC (Universal Time). Set using the
	set timezone command (“set timezone” on page 14-36).
Client Mode	Whether SNTP client is operating in unicast or broadcast mode. Set using set sntp
	client command (“set sntp client” on page 14-31).
Broadcast Count	Number of SNTP broadcast frames received.
Poll Interval	Interval between SNTP unicast requests. Default of 512 seconds can be reset using
	the set sntp poll-intervalcommand (“set sntp poll-interval” on page 14-33).
Poll Retry	Number of poll retries to a unicast SNTP server. Default of 1 can be reset using the
	set sntp poll-retrycommand (“set sntp poll-retry” on page 14-34).
Poll Timeout	Timeout for a response to a unicast SNTP request. Default of 5 seconds can be
	reset using set sntp poll-timeoutcommand (“set sntp poll-timeout” on page 14-35).
SNTP Poll Requests	Total number of SNTP poll requests.

14-30 Logging and Network Management