Enterasys Networks 9034313-07 Set linkflap globalstate, Set linkflap portstate, Disable enable

set linkflap globalstate

Table 7-5 show linkflap metrics Output Details (Continued)

Output Field	What it displays...
TimeElapsed	Time (in seconds) since the last link down event.
Violations	Number of link flap violations on listed ports since system start.

set linkflap globalstate

Use this command to globally enable or disable the link flap detection function.

Syntax

set linkflap globalstate {disable enable}

Parameters

disable enable Globally disables or enables the link flap detection function.

Defaults

By default, the function is disabled globally and on all ports.

Mode

Switch mode, read‐write.

Usage

By default, the function is disabled globally and on all ports. If disabled globally after per‐port settings have been configured using the linkflap commands, per‐port settings will be retained.

Example

This example shows how to globally enable the link trap detection function.

C3(rw)->set linkflap globalstate enable

set linkflap portstate

Use this command to enable or disable link flap monitoring on one or more ports.

Syntax

set linkflap portstate {disable enable} [port-string]

Parameters

disable enable	Disables or enables the link flap detection function.
port‐string	(Optional) Specifies the port or ports on which to disable or enable
	monitoring.

Defaults

If port‐string is not specified, all ports are enabled or disabled.

7-28 Port Configuration