Enterasys Networks 9034313-07 manual Clear spantree adminpathcost, Show spantree adminedge

clear spantree adminpathcost

Example

This example shows how to set the admin path cost to 200 for ge.3.2 on SID 1:

C3(su)->set spantree adminpathcost ge.3.2 200 sid 1

clear spantree adminpathcost

Use this command to reset the Spanning Tree default value for port admin path cost to 0.

Syntax

clear spantree adminpathcost port-string[sid sid]

Parameters

port‐string	Specifies the port(s) for which to reset admin path cost. For a detailed
	description of possible port‐string values, refer to “Port String Syntax
	Used in the CLI” on page 7‐1.
sid sid	(Optional) Resets the admin path cost for specific Spanning Tree(s).
	Valid values are 0 ‐ 4094. If not specified, SID 0 is assumed.

Defaults

If sid is not specified, admin path cost will be reset for Spanning Tree 0.

Mode

Switch command, read‐write.

Example

This example shows how to reset the admin path cost to 0 for ge.3.2 on SID 1:

C3(su)->clear spantree adminpathcost ge.3.2 sid 1

show spantree adminedge

Use this command to display the edge port administrative status for a port.

Syntax

show spantree adminedge [port port-string]

Parameters

port‐string	(Optional) Displays edge port administrative status for specific
	port(s). For a detailed description of possible port‐string values,
	refer to “Port String Syntax Used in the CLI” on page 7‐1.

Defaults

If port‐string is not specified edge port administrative status will be displayed for all Spanning Tree ports.

SecureStack C3 Configuration Guide 9-39