Enterasys Networks 9034313-07 manual Set port jumbo, Clear port jumbo

set port jumbo

set port jumbo

Use this command to enable or disable jumbo frame support on one or more ports.

Syntax

set port jumbo {enable disable}[port-string]

Parameters

enable disable	Enables or disables jumbo frame support.
port‐string	(Optional) Specifies the port(s) on which to disable or enable jumbo
	frame support. For a detailed description of possible port‐string values,
	refer to “Port String Syntax Used in the CLI” on page 7‐1.

Defaults

If port‐string is not specified, jumbo frame support will be enabled or disabled on all ports.

Mode

Switch command, read‐write.

Example

This example shows how to enable jumbo frame support for Gigabit Ethernet port 14 in unit/slot 3:

C3(su)->set port jumbo enable ge.3.14

clear port jumbo

Use this command to reset jumbo frame support status to enabled on one or more ports.

Syntax

clear port jumbo [port-string]

Parameters

port‐string	(Optional) Specifies the port(s) on which to reset jumbo frame
	support status to enabled. For a detailed description of possible
	port‐string values, refer to “Port String Syntax Used in the CLI” on
	page 7‐1.

Defaults

If port‐string is not specified, jumbo frame support status will be reset on all ports.

Mode

Switch command, read‐write.

Example

This example shows how to reset jumbo frame support status for Gigabit Ethernet port 14 in slot 3:

C3(su)->clear port jumbo ge.3.14

SecureStack C3 Configuration Guide 7-15