Enterasys Networks 9034313-07 Set snmp notify, ‐10 provides an explanation of the command output

set snmp notify

Example

This example shows how to display the SNMP notify information:

C3(su)->show snmp notify

--- SNMP notifyTable information ---

Notify name	= 1
Notify Tag	= Console
Notify Type	= trap
Storage type	= nonVolatile
Row status	= active
Notify name	= 2
Notify Tag	= TrapSink
Notify Type	= trap
Storage type	= nonVolatile
Row status	= active

Table 8‐10 provides an explanation of the command output.

Table 8-10 show snmp notify Output Details

Output Field	What It Displays...
Notify name	A unique identifier used to index the SNMP notify table.
Notify Tag	Name of the entry in the SNMP notify table.
Notify Type	Type of notification: SNMPv1 or v2 trap or SNMPv3 InformRequest
	message.
Storage type	Whether access entry is stored in volatile, nonvolatile, or read-only
	memory.
Row status	Status of this entry: active, notInService, or notReady.

set snmp notify

Use this command to set the SNMP notify configuration. This creates an entry in the SNMP notify table, which is used to select management targets who should receive notification messages. This command’s tag parameter can be used to bind each entry to a target address using the set snmp targetaddr command (“set snmp targetaddr” on page 8‐27).

Syntax

set snmp notify notify tag tag [trap inform] [volatile nonvolatile]

Parameters

notify	Specifies an SNMP notify name.
tag tag	Specifies an SNMP notify tag. This binds the notify name to the SNMP
	target address table.
trap inform	(Optional) Specifies SNMPv1 or v2 Trap messages (default) or SNMP v3
	InformRequest messages.
volatile	(Optional) Specifies temporary (default), or permanent storage for SNMP
nonvolatile	entries.

Defaults

If not specified, message type will be set to trap.

8-32 SNMP Configuration