clear logging default

Example

This example shows how to set the Syslog default facility name to local2 and the severity level to 4 (error logging):

C3(su)->set logging default facility local2 severity 4

clear logging default

Use this command to reset logging default values.

Syntax

clear logging default {[facility] [severity] [port]}

Parameters

facility

(Optional) Resets the default facility name to local4.

severity

(Optional) Resets the default logging severity level to 6 (notifications of

 

significant conditions).

 

 

port

(Optional) Resets the default UDP port the client uses to send to the server

 

to 514.

 

 

Defaults

At least one optional parameter must be entered.

All three optional keywords must be entered to reset all logging values to defaults.

Mode

Switch command, read‐write.

Example

This example shows how to reset the Syslog default severity level to 6:

C3(su)->clear logging default severity

show logging application

Use this command to display the severity level of Syslog messages for one or all applications configured for logging on your system.

Syntax

show logging application [mnemonic all]

14-6 Logging and Network Management

Page 420
Image 420
Enterasys Networks 9034313-07 manual Clear logging default, Show logging application, Facility, Severity