Enterasys Networks 9034313-07 manual Creating and Naming Static VLANs, Set vlan

Creating and Naming Static VLANs

Creating and Naming Static VLANs

Purpose

To create a new static VLAN, or to enable or disable existing VLAN(s).

Commands

For information about...	Refer to page...
set vlan	10-5
set vlan name	10-6
clear vlan	10-6
clear vlan name	10-7

set vlan

Use this command to create a new static IEEE 802.1Q VLAN, or to enable or disable an existing VLAN.

Syntax

set vlan {create enable disable} vlan-list

Parameters

create enable Creates, enables or disables VLAN(s). disable

vlan‐list Specifies one or more VLAN IDs to be created, enabled or disabled.

Defaults

None.

Mode

Switch command, read‐write.

Usage

Once a VLAN is created, you can assign it a name using the set vlan name command described in “set vlan name” on page 10‐6.

Each VLAN ID must be unique. If a duplicate VLAN ID is entered, the device assumes that the Administrator intends to modify the existing VLAN.

Enter the VLAN ID using a unique number between 1 and 4093. The VLAN IDs of 0 and 4094 and higher may not be used for user‐defined VLANs.

Examples

This example shows how to create VLAN 3:

C3(su)->set vlan create 3

SecureStack C3 Configuration Guide 10-5