Enterasys Networks 9034313-07 manual Copy, Append, Systemimage

copy

Parameters

filename	Specifies the path and file name of the configuration file to execute.
append	(Optional) Appends the configuration file contents to the current
	configuration. This is equivalent to typing the contents of the config file
	directly into the CLI and can be used, for example, to make incremental
	adjustments to the current configuration.

Defaults

If append is not specified, the current running configuration will be replaced with the contents of the configuration file, which will require an automated reset of the chassis.

Mode

Switch command, read‐write.

Example

This example shows how to execute the “Jan1_2004.cfg” configuration file:

C3(su)->configure configs/Jan1_2004.cfg

copy

Use this command to upload or download an image or a CLI configuration file.

Syntax

copy source {destination system:image}

Parameters

source	Specifies location and name of the source file to copy. Options are a local file
	path in the configs or logs directory, or the URL of a TFTP, Secure FTP (SFTP),
	or Secure Copy (SCP) server.
destination	Specifies location and name of the destination where the file will be copied.
	Options are a local file path in the configs directory, or the URL of a TFTP,
	SFTP, or SCP server.
system:image	The required destination of an image file.
	Note: Only TFTP can be used to download an image file.

Defaults

None.

Mode

Switch command, read‐write.

Usage

SFTP and SCP can only be used to transfer configuration files or the logs/current.log file. You cannot use SFTP or SCP to download images (system:image).

SecureStack C3 Configuration Guide 3-45