Enterasys Networks 9034313-07 manual Show ip address, Switch command, read‐only

show ip address

For information about...	Refer to page...
clear summertime	3-24
set prompt	3-24
show banner motd	3-25
set banner motd	3-25
clear banner motd	3-26
show version	3-26
set system name	3-27
set system location	3-28
set system contact	3-28
set width	3-29
set length	3-29
show logout	3-30
set logout	3-30
show console	3-31
set console baud	3-31

show ip address

Use this command to display the system IP address and subnet mask.

Syntax

show ip address

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

Example

This example shows how to display the system IP address and subnet mask:

C3(su)->show ip address	Address	Mask
Name
host----------------	----------------	----------------
	10.42.13.20	255.255.0.0

3-10 Basic Configuration