Enterasys Networks 9034313-07 Clear port txq, By default, transmit queues are defined as follows

clear port txq

clear port txq

Use this command to clear port transmit queue values back to their default values.

Syntax

clear port txq port-string

Parameters

port‐string	Clears transmit queue values on specific port(s) back to their default
	values. For a detailed description of possible port‐string values, refer to
	“Port String Syntax Used in the CLI” on page 7‐1.
	Only physical ports can be configured with this command. LAG ports
	cannot be configured.

Defaults

By default, transmit queues are defined as follows:

Queue	Mode	Weight	Queue	Mode	Weight
0	WRR	1	4	WRR	5
1	WRR	2	5	WRR	6
2	WRR	3	6	WRR	7
3	WRR	4	7	WRR	8

Mode

Switch command, read‐write.

Example

This example shows how to clear transmit queue values on ge.1.1:

C3(su)->clear port txq ge.1.1

SecureStack C3 Configuration Guide 12-9