Enterasys Networks 9034313-07 Set logging application, Show logging application Output Details

		set logging application
Parameters
	mnemonic	(Optional) Displays severity level for one application configured for
		logging. Mnemonics will vary depending on the number and types of
		applications running on your system. Sample mnemonics and their
		corresponding applications are listed in Table 14‐3 on page 14‐8.
		Note: Mnemonic values are case sensitive and must be typed as they appear in
		Table 14-3.
	all	(Optional) Displays severity level for all applications configured for
		logging.

Defaults

If no parameter is specified, information for all applications will be displayed.

Mode

Switch command, read‐only.

Example

This example shows how to display system logging information pertaining to the SNMP application.

C3(ro)->show logging application SNMP

Application		Current Severity Level
---------------------------------------------
90	SNMP		6
1(emergencies)		2(alerts)	3(critical)
4(errors)		5(warnings)	6(notifications)
7(information)		8(debugging)

Table 14‐2 provides an explanation of the command output.

Table 14-2 show logging application Output Details

Output Field	What it displays...
Application	A mnemonic abbreviation of the textual description for
	applications being logged.
Current Severity Level	Severity level at which the server is logging messages for the
	listed application. This range (from 1 to 8) and its associated
	severity list is shown in the CLI output. For a description of these
	entries, which are set using the set logging application
	command, refer to “set logging application” on page 14-7.

set logging application

Use this command to set the severity level of log messages for one or all applications.

Syntax

set logging application {[mnemonic all]} [level level]

SecureStack C3 Configuration Guide 14-7