Enterasys Networks 9034313-07 manual Show port protected, Clear port protected, Read‐only

show port protected

Example

This example shows how to assign ports ge.1.1 through ge.1.3 to protected port group 1:

C3(rw)->set port protected ge.1.1-3 1

show port protected

Use this command to display information about the ports configured for protected mode.

Syntax

show port protected [port-string] [group-id]

Parameters

port‐string	(Optional) Specifies the port or ports for which to display information.
group‐id	(Optional) Specifies the id of the group for which to display information.
	Id can range from 0 to 2.

Defaults

If no parameters are entered, information about all protected ports is displayed.

Mode

Read‐only.

Example

This example shows how to display information about all protected ports:

C3(ro)->show port protected

Group id Port

----------------------

1 ge.1.1

1ge.1.2

1ge.1.3

clear port protected

Use this command to remove a port or group from protected mode.

Syntax

clear port protected [port-string] [group-id]

Parameters

port‐string	(Optional) Specifies the port or ports to remove from protected mode.
group‐id	(Optional) Specifies the id of the group to remove from protected mode.
	Id can range from 0 to 2.

Defaults

If no parameters are entered, all protected ports and groups are cleared.

SecureStack C3 Configuration Guide 7-57