Enterasys Networks 9034313-07 manual Show spantree portpri, Set spantree portpri

show spantree portpri

Example

This example shows how to display port admin status for ge.1.1:

C3(ro)->show spantree portadmin port ge.1.1

Port ge.1.1 has portadmin set to enabled

show spantree portpri

Use this command to show the Spanning Tree priority for one or more ports. Port priority is a component of the port ID, which is one element used in determining Spanning Tree port roles.

Syntax

show spantree portpri [port port-string] [sid sid]

Parameters

port port‐string	(Optional) Specifies the port(s) for which to display Spanning Tree priority.
	For a detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.
sid sid	(Optional) Displays port priority for a specific Spanning Tree identifier.
	Valid values are 0 ‐ 4094. If not specified, SID 0 is assumed.

Defaults

If port‐string is not specified, port priority will be displayed for all Spanning Tree ports.

If sid is not specified, port priority will be displayed for Spanning Tree 0.

Mode

Switch command, read‐only.

Example

This example shows how to display the port priority for ge.2.7:

C3(su)->show spantree portpri port ge.2.7

Port ge.2.7 has a Port Priority of 128 on SID 0

set spantree portpri

Use this command to set a port’s Spanning Tree priority.

Syntax

set spantree portpri port-string priority [sid sid]

9-36 Spanning Tree Configuration