Enterasys Networks 9034313-07 manual Examples, Show port counters Output Details

show port counters

Examples

This example shows how to display all counter statistics, including MIB2 network traffic and traffic through the device for ge.3.1:

C3(su)->show port counters ge.3.1

Port: ge.3.1 MIB2 Interface: 1 No counter discontinuity time

-----------------------------------------------------------------

MIB2 Interface Counters
-----------------------	0
In Octets
In Unicast Pkts	0
In Multicast Pkts	0
In Broadcast Pkts	0
In Discards	0
In Errors	0
Out Octets	0
Out Unicasts Pkts	0
Out Multicast Pkts	0
Out Broadcast Pkts	0
Out Errors	0
802.1Q Switch Counters
----------------------	0
Frames Received
Frames Transmitted	0

This example shows how to display all ge.3.1 port counter statistics related to traffic through the device.

C3(su)->show port counters ge.3.1 switch

Port: ge.3.1		Bridge Port: 2
802.1Q	Switch Counters
-----------------------
Frames Received		0
Frames Transmitted		0

Table 7‐2 provides an explanation of the command output.

Table 7-2 show port counters Output Details

Output Field	What It Displays...
Port	Port designation. For a detailed description of possible port-stringvalues, refer to
	“Port String Syntax Used in the CLI” on page 7-1.
MIB2 Interface	MIB2 interface designation.
Bridge Port	IEEE 802.1D bridge port designation.
MIB2 Interface	MIB2 network traffic counts
Counters
802.1Q Switch	Counts of frames received, transmitted, and filtered.
Counters

SecureStack C3 Configuration Guide 7-5