Enterasys Networks 9034313-07 manual Set port disable, Set port enable

set port disable

set port disable

Use this command to administratively disable one or more ports. When this command is executed, in addition to disabling the physical Ethernet link, the port will no longer learn entries in the forwarding database.

Syntax

set port disable port-string

Parameters

port‐string	Specifies the port(s) to disable. For a detailed description of possible port‐
	string values, refer to “Port String Syntax Used in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to disable ge.1.1:

C3(su)->set port disable ge.1.1

set port enable

Use this command to administratively enable one or more ports.

Syntax

set port enable port-string

Parameters

port‐string	Specifies the port(s) to enable. For a detailed description of possible port‐
	string values, refer to “Port String Syntax Used in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to enable ge.1.3:

C3(su)->set port enable ge.1.3

7-8 Port Configuration