Enterasys Networks 9034313-07 Show snmp context, Set snmp view, Show snmp view Output Details

show snmp context

Table 8-7 show snmp view Output Details

Output Field	What It Displays...
View Name	Name assigned to a MIB view.
Subtree OID	Name identifying a MIB subtree.
Subtree mask	Bitmask applied to a MIB subtree.
View Type	Whether or not subtree use must be included or excluded for this view.
Storage type	Whether storage is in nonVolatile or Volatile memory
Row status	Status of this entry: active, notInService, or notReady.

show snmp context

Use this command to display the context list configuration for SNMP’s view‐based access control.

Syntax

show snmp context

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

Usage

An SNMP context is a collection of management information that can be accessed by an SNMP agent or entity. The default context allows all SNMP agents to access all management information (MIBs). When created using the set snmp access command (“set snmp access” on page 8‐18), other contexts can be applied to limit access to a subset of management information.

Example

This example shows how to display a list of all SNMP contexts known to the device:

C3(su)->show snmp context

---Configured contexts: default context (all mibs)

set snmp view

Use this command to set a MIB configuration for SNMPv3 view‐based access (VACM).

Syntax

set snmp view viewname viewname subtree subtree [mask mask] [included excluded] [volatile nonvolatile]

SecureStack C3 Configuration Guide 8-21