Setting Speed and Duplex Mode

Setting Speed and Duplex Mode

Purpose

To review and set the operational speed in Mbps and the default duplex mode: Half, for half duplex, or Full, for full duplex for one or more ports.

Note: These settings only take effect on ports that have auto-negotiation disabled.

Commands

For information about...

Refer to page...

 

 

show port speed

7-11

 

 

set port speed

7-12

 

 

show port duplex

7-12

 

 

set port duplex

7-16

 

 

show port speed

Use this command to display the default speed setting on one or more ports.

Syntax

show port speed [port-string]

Parameters

port‐string

(Optional) Displays default speed setting(s) for specific port(s). For a

 

detailed description of possible port‐string values, refer to Port String

 

Syntax Used in the CLI” on page 7‐1.

 

 

Defaults

If port‐string is not specified, default speed settings for all ports will display.

Mode

Switch command, read‐only.

Example

This example shows how to display the default speed setting for 1‐Gigabit Ethernet port 14 in slot 3:

C3(su)->show port speed ge.3.14 default speed is 10 on port ge.3.14.

SecureStack C3 Configuration Guide 7-11

Page 179
Image 179
Enterasys Networks 9034313-07 manual Setting Speed and Duplex Mode, Show port speed