Enterasys Networks 9034313-07 manual Default-metric, No default metric is configured

default-metric

Mode

Router OSPFv3 configuration: C3(su)‐>router(Config‐router)#

Usage

Use this command to generate a default external route into an OSPFv3 routing domain. Use the no form of this command to stop the generation of a default external route.

Example

This example specifies a metric of 100 for the default route redistributed into the OSPFv3 routing domain, and an external metric type of 1.

C3(su)->router(Config-router)# default-information originate metric 100 metric-type 1

default-metric

This command sets a default metric for routes redistributed from another protocol into OSPFv3.

Syntax

default-metric metric

no default-metric

Parameters

metric The value of metric can range from 1 to 16777214.

Defaults

No default metric is configured.

Mode

Router OSPFv3 configuration: C3(su)->router(Config-router)#

Usage

Use this command to cause the same metric value to be used for all redistributed routes.

Use the no form of this command to remove a configured default metric.

Example

This example configures a metric of 100 to be used for all redistributed routes.

C3(su)->router(Config-router)# default-metric 100

distance ospf

This command sets the route preference value of OSPFv3.

Syntax

distance ospf {intra inter type1 type2} preference

no distance ospf {intra inter type1 type2}

SecureStack C3 Configuration Guide 25-5