Enterasys Networks 9034313-07 manual Configuring Port Priority, Show port priority

Configuring Port Priority

Configuring Port Priority

Purpose

To view or configure port priority characteristics as follows:

•Display or change the port default Class‐of Service (CoS) transmit priority (0 through 7) of each port for frames that are received (ingress) without priority information in their tag header.

•Display the current traffic class mapping‐to‐priority of each port.

•Set each port to transmit frames according to 802.1D (802.1p) priority set in the frame header.

Commands

For information about...	Refer to page...
show port priority	12-4
set port priority	12-3
clear port priority	12-3

show port priority

Use this command to display the 802.1D priority for one or more ports.

Syntax

show port priority [port-string]

Parameters

port‐string	(Optional) Displays priority information for a specific port. For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

If port-stringis not specified, priority for all ports will be displayed.

Mode

Switch command, read‐only.

Example

This example shows how to display the port priority for the ge.2.1 through 5.

C3(su)->show port priority ge.2.1-5 ge.2.1 is set to 0

ge.2.2 is set to 0 ge.2.3 is set to 0 ge.2.4 is set to 0 ge.2.5 is set to 0

12-2 Port Priority Configuration