Enterasys Networks 9034313-07 manual Clear lldp port status, Clear lldp port trap

clear lldp port status

Defaults

None.

Mode

Switch command, read‐write.

Example

This example returns the transmit interval to the default value of 30 seconds.

C3(rw)->clear lldp tx-interval

clear lldp port status

Use this command to return the port status to the default value of both (both transmitting and processing received LLDPDUs are enabled).

Syntax

clear lldp port status port-string

Parameters

port‐string Specifies the port or range of ports to be affected.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example returns port ge.1.1 to the default state of enabled for both transmitting and processing received LLDPDUs.

C3(rw)->clear lldp port status ge.1.1

clear lldp port trap

Use this command to return the port LLDP trap setting to the default value of disabled.

Syntax

clear lldp port trap port-string

Parameters

port‐string Specifies the port or range of ports to be affected.

Defaults

None.

6-32 Discovery Protocol Configuration