Nortel Networks BMD00007 manual Ospf Interface Configuration, Prio priority value, Cost cost value

Alteon OS Command Reference

Table 6-71OSPF Summary Range Configuration Menu Options (/cfg/l3/ospf/range)

Command Syntax and Usage

disable

Disables the OSPF summary range.

delete

Deletes the OSPF summary range.

current

Displays the current OSPF summary range.

/cfg/l3/ospf/if <interface number>

OSPF Interface Configuration

[OSPF Interface		1 Menu]
aindex	-	Set area index
prio	-	Set interface router priority
cost	-	Set interface cost
hello	-	Set hello interval in seconds
dead	-	Set dead interval in seconds
trans	-	Set transit delay in seconds
retra	-	Set retransmit interval in seconds
key	-	Set authentication key
mdkey	-	Set MD5 key ID
enable	-	Enable interface
disable	-	Disable interface
delete	-	Delete interface
cur	-	Display current OSPF interface configuration

Table 6-72OSPF Interface Configuration Menu Options (/cfg/l3/ospf/if)

Command Syntax and Usage

aindex <area index (0-2)>

Configures the OSPF area index.

prio <priority value (0-255)>

Configures the priority value for the GbE Switch Module’s OSPF interfaces.

(A priority value of 255 is the highest and 1 is the lowest. A priority value of 0 specifies that the interface cannot be used as Designated Router (DR) or Backup Designated Router (BDR).)

cost <cost value (1-65535)>

Configures cost set for the selected path—preferred or backup. Usually the cost is inversely pro- portional to the bandwidth of the interface. Low cost indicates high bandwidth.

BMD00007, November 2007 The Configuration Menu „ 275