Nortel Networks BMD00007 manual Info/l2/lacp, Link Aggregation Control Protocol Information

Alteon OS Command Reference

/info/l2/lacp

Link Aggregation Control Protocol Information

[LACP Menu]	- Show LACP aggregator information for the port
aggr
port	-	Show LACP port information
dump	-	Show all LACP ports information

Use these commands to display Link Aggregation Protocol (LACP) status information about each port on the GbE Switch Module.

Table 4-14LACP Menu Options (/info/l2/lacp)

Command Syntax and Usage

aggr

Displays detailed information of the LACP aggregator used by the selected port.

port

Displays LACP information about the selected port.

dump

Displays a summary of LACP information. For details, see page 78.

/info/l2/lacp/dump

Show all LACP Information

port lacp adminkey operkey selected prio	attached trunk
	aggr

----------------------------------------------------------------

INT1	active	30	30	y	32768	17	19
INT2	active	30	30	y	32768	17	19
INT3	off	19	19	n	32768	--	--
INT4	off	20	20	n	32768	--	--
...

LACP dump includes the following information for each external port in the GbESM:

„lacp

Displays the port’s LACP mode (active, passive, or off)

„adminkey

Displays the value of the port’s adminkey.

„operkey

Shows the value of the port’s operational key.

78 „ The Information Menu BMD00007, November 2007