Error messages on screen
Error messages on screen| Error Message | Solution |
|
|
Printer not responding/ | Verify the following: |
error writing to LPT1 | ● Ready light is on. |
| ● Power cord and parallel cable are correctly |
| connected. |
| Try the following: |
| ● Disconnect and reconnect the power cord |
| and parallel cable at both ends. |
| ● Use another |
| cable. |
|
|
Cannot access port (in | There is a device conflict. This can occur if |
use by another | another printer connected to your computer is |
application) | running status software. The status software |
| dominates the parallel port on the computer and |
| will not allow the HP LaserJet 1100 to access the |
| port. |
Try the following:
●Disable all status windows for other printers.
●Verify the port setting is correct for the printer. Access the printer properties; see “Printer properties (driver).” The port settings can be accessed under the properties Details tab in the Printer Properties screen.
EN | Finding the solution 41 |