Cleaning the printer paper path

This process uses copier-grade paper to remove dust and toner from the paper path. Do not use bond or rough paper. Use this process if you are experiencing toner specks or dots on printouts. This process will produce a page with toner debris, which should be discarded.

1 Ensure the printer is loaded with paper.

2Ensure the printer is in the Ready state.

3Press and hold the GO button for 20 seconds (if released before 20 seconds the printer will perform a reset). Paper will feed through the printer.

Note

After holding the GO button for 20 seconds, each of the three printer

 

lights will blink until the cleaning process is complete.

 

 

EN

Cleaning the printer 53