Nortel Networks BMD00007 manual IP Interface Configuration, 56IP Interface Menu Options /cfg/l3/if

Alteon OS Command Reference

/cfg/l3/if <interface number>

IP Interface Configuration

[IP Interface	1	Menu]
addr	- Set IP address
mask	- Set subnet mask
vlan	- Set VLAN number
relay	- Enable or disable BOOTP relay
ena	- Enable interface
dis	- Disable interface
del	- Delete interface
cur	- Display current interface configuration

The GbE Switch Module can be configured with up to 128 IP interfaces. Each IP interface repre- sents the GbE Switch Module on an IP subnet on your network. The Interface option is disabled by default.

NOTE – To maintain connectivity between the management module and the GbE Switch Mod- ule, use the management module interface to change the IP address of the switch.

Table 6-56IP Interface Menu Options (/cfg/l3/if)

Command Syntax and Usage

addr <IP address (such as 192.4.17.101)>

Configures the IP address of the switch interface using dotted decimal notation.

mask <IP subnet mask (such as 255.255.255.0)>

Configures the IP subnet address mask for the interface using dotted decimal notation.

vlan <VLAN number (1-4095)>

Configures the VLAN number for this interface. Each interface can belong to one VLAN, though any VLAN can have multiple IP interfaces in it.

relay disableenable

Enables or disables the BOOTP relay on this interface. It is enabled by default.

ena

Enables this IP interface.

dis

Disables this IP interface.

BMD00007, November 2007 The Configuration Menu „ 255