Nortel Networks BMD00007 manual Cfg/l2/lacp, Lacp Configuration, 47LACP Menu Options /cfg/l2/lacp

Alteon OS Command Reference

/cfg/l2/lacp

LACP Configuration

[LACP Menu]	- Set LACP system priority
sysprio
timeout	- Set LACP system timeout scale for timing out partner
port	info
	- LACP port Menu
cur	- Display current LACP configuration

Use the following commands to configure Link Aggregation Control Protocol (LACP) for the GbESM.

Table 6-47LACP Menu Options (/cfg/l2/lacp)

Command Syntax and Usage

sysprio <1-65535>

Defines the priority value (1 through 65535) for the GbESM. Lower numbers provide higher prior- ity. The default value is 32768.

timeout shortlong

Defines the timeout period before invalidating LACP data from a remote partner. Choose short (3 seconds) or long (90 seconds). The default value is long.

Note: It is recommended that you use a timeout value of long, to reduce LACPDU processing. If your GbESM’s CPU utilization rate remains at 100% for periods of 90 seconds or more, consider using static trunks instead of LACP.

port <port alias or number>

Displays the LACP Port menu. To view menu options, see page 244.

cur

Display current LACP configuration.

BMD00007, November 2007 The Configuration Menu „ 243