Nortel Networks BMD00007 manual Working with Switch Images Configuration Files, Mib Oid

Alteon OS Command Reference

Working with Switch Images and

Configuration Files

This section describes how to use MIB calls to work with switch images and configuration files. You can use a standard SNMP tool to perform the actions, using the MIBs listed in Table 9-11.

The examples in this section use the MIB name, but you can also use the OID.

Table 9-11lists the MIBS used to perform operations associated with the GbESM Switch Image and Configuration files. These MIBS are contained within in the file “aosswitch.mib”

Table 9-11MIBs for Switch Image and Configuration Files

MIB Name MIB OID

agTftpServer1.3.6.1.4.1872.2.5.1.1.7.1.0

agTftpImage1.3.6.1.4.1872.2.5.1.1.7.2.0

agTftpImageFileName1.3.6.1.4.1872.2.5.1.1.7.3.0

agTftpCfgFileName1.3.6.1.4.1872.2.5.1.1.7.4.0

agTftpDumpFileName1.3.6.1.4.1872.2.5.1.1.7.5.0

agTftpAction1.3.6.1.4.1872.2.5.1.1.7.6.0

agTftpLastActionStatus1.3.6.1.4.1872.2.5.1.1.7.7.0

agTftpUserName1.3.6.1.4.1872.2.5.1.1.7.9.0

agTftpPassword1.3.6.1.4.1.1872.2.5.1.1.7.10.0

agTftpTSDumpFileName1.3.6.1.4.1.1872.2.5.1.1.7.11.0

The following SNMP actions can be performed using the MIBs listed in Table 9-11.

„Load a new Switch image (boot or running) from a FTP/TFTP server

„Load a previously saved switch configuration from a FTP/TFTP server

„Save the switch configuration to a FTP/TFTP server

„Save a switch dump to a FTP/TFTP server

378 „ Alteon OS SNMP Agent BMD00007, November 2007