Cisco Systems 1900 Using Previous Releases of the Switch Firmware, Supported Browsers, Board

Using Previous Releases of the Switch Firmware

Using Previous Releases of the Switch Firmware

The Catalyst 1900 and Catalyst 2820 switches are shipped with firmware version 9.00.05. Depending on the board version of your switch, you need the minimum firmware releases listed in Table 1.

The “System Revision” field on the System Configuration menu displays the board revision of your switch. When you use the show version command from the command-line interface (CLI), the “Hardware Board Revision Is” field displays the board revision.

The Firmware Configuration Menu and the Console and Upgrade Configuration page display the firmware version in use.

Table 1	Supported Firmware on the Catalyst 1900 and Catalyst 2820 Switches
Board
Revision		Switch	Supported Firmware Version
1		Catalyst 1900-A	6.x or later
		Catalyst 1900-EN
1		Catalyst 2820-A	6.x or later
		Catalyst 2820-EN
4		Catalyst 1900-A	8.00.04 or later
		Catalyst 1900-EN
5		Catalyst 1900-A	8.01.00 or later
		Catalyst 1900-EN
5		Catalyst 2820-A	8.01.01 or later
		Catalyst 2820-EN

Supported Browsers

To use the Catalyst 1900 or Catalyst 2820 Switch Manager, you must have one of these web browsers installed on your management station:

Table 2	Browser Support for Web-Based Management
Browser		Minimum Version	Supported Version
Netscape Communicator		4.5	4.5, 4.51, 4.61
Microsoft Internet Explorer		4.01a	4.01a, 5.0

Note Netscape Communicator 4.60 is not a supported browser. Microsoft Internet Explorer is not a supported browser on Solaris 2.5.1 or later operating systems.

For information about configuring your browsers, refer to the Catalyst 1900 Series Installation and Configuration Guide and the Catalyst 2820 Series Installation and Configuration Guide.

Release Notes for the Catalyst 1900 and Catalyst 2820 Series Switches, Version 9.00.06

2 OL-2901-01