GS716Tv2 and GS724Tv3 Software Administration Manual

Switch Discovery in a Network with a DHCP Server

This section describes how to set up your switch in a network that has a DHCP server. The DHCP client on the switch is enabled by default. When you connect it to your network, the DHCP server will automatically assign an IP address to your switch. Use the Smart Control Center to discover the IP address automatically assigned to the switch.

To install the switch in a network with a DHCP server, use the following steps:

1.Connect the switch to a network with a DHCP server.

2.Power on the switch by connecting its AC-DC power adapter.

3.Install the Smart Control Center on your computer.

4.Start the Smart Control Center.

5.Click Discover for the Smart Control Center to find your switch. You should see a screen similar to the one shown in the following figure.

y

6.Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a Web browser (without using the Smart Control Center).

7.Select your switch by clicking the line that displays the switch, then click the

Web Browser Access button. The Smart Control Center displays a login window similar to the following figure.

Chapter 1: Getting Started 13

Page 13
Image 13
NETGEAR GS724TS-100NAS manual Switch Discovery in a Network with a Dhcp Server