LLDP-MED Port Settings, Vlan ID | NETGEAR GS724TS-100NAS instruction

Field	Description
Network Policy Number	Specifies the policy number.

Application	Specifies the media application type associated with the policy. Only the
	Voice application type is supported. The application type that is received on
	the interface has the VLAN ID, priority, DSCP, tagged bit status and
	unknown bit status. This information is displayed only if a network policy TLV
	has been transmitted.

VLAN ID	Specifies the VLAN ID associated with the policy.

VLAN Type	Specifies whether the VLAN associated with the policy is tagged or
	untagged.

User Priority	Specifies the priority associated with the policy.

DSCP	Specifies the DSCP associated with a particular policy type.

Click Refresh to refresh the page with the most current data from the switch.

LLDP-MED Port Settings

Use this page to enable LLDP-MED mode on an interface and configure its properties.

To display this page, click System > LLDP > Advanced > LLDP-MED Port Settings.

To configure LLDP-MED settings for a port:

1.From the Port field, select the port to configure.

2.From the LLDP-MED Status field, enable or disable the LLDP-MED mode for the selected interface.

56 Chapter 2: Configuring System Information