
GS716Tv2 and GS724Tv3 Software Administration Manual
Field | Description |
Unicast Packets Received | The number of |
| protocol. |
|
|
Multicast Packets Received | The total number of good packets received that were directed to a multicast |
| address. This number does not include packets directed to the broadcast |
| address. |
|
|
Broadcast Packets | The total number of good packets received that were directed to the broadcast |
Received | address. This does not include multicast packets. |
|
|
Total Packets Received with | The total number of inbound packets that contained errors preventing them |
MAC Errors | from being deliverable to a |
|
|
Jabbers Received | The total number of packets received that were longer than 1518 octets |
| (excluding framing bits, but including FCS octets), and had either a bad Frame |
| Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad |
| FCS with a |
| jabber is different than the definition in |
| and section 10.3.1.4 (10BASE2). These documents define jabber as the |
| condition where any packet exceeds 20 ms. The allowed range to detect |
| jabber is between 20 ms and 150 ms. |
|
|
Fragments Received | The total number of packets received that were less than 64 octets in length |
| with ERROR CRC (excluding framing bits but including FCS octets). |
|
|
Undersize Received | The total number of packets received that were less than 64 octets in length |
| with GOOD CRC (excluding framing bits but including FCS octets). |
|
|
Alignment Errors | The total number of packets received that had a length (excluding framing bits, |
| but including FCS octets) of between 64 and 1518 octets, inclusive, but had a |
| bad Frame Check Sequence (FCS) with a |
|
|
Rx FCS Errors | The total number of packets received that had a length (excluding framing bits, |
| but including FCS octets) of between 64 and 1518 octets, inclusive, but had a |
| bad Frame Check Sequence (FCS) with an integral number of octets |
|
|
Overruns | The total number of frames discarded as this port was overloaded with |
| incoming packets, and could not keep up with the inflow. |
|
|
Total Received Packets Not | A count of valid frames received which were discarded (i.e., filtered) by the |
Forwarded | forwarding process. |
|
|
Local Traffic Frames | The total number of frames dropped in the forwarding process because the |
| destination address was located off of this port. |
|
|
802.3x Pause Frames | A count of MAC Control frames received on this interface with an opcode |
Received | indicating the PAUSE operation. This counter does not increment when the |
| interface is operating in |
|
|
Unacceptable Frame Type | The number of frames discarded from this port due to being an unacceptable |
| frame type. |
|
|
Multicast Tree Viable | The number of frames discarded when a lookup in the multicast tree for a |
Discards | VLAN occurs while that tree is being modified. |
|
|
208 Chapter 6: Monitoring the System