GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring Management Access

From the Access page, you can configure HTTP and Secure HTTP access to the GS716T or GS724T management interface. You can also configure Access Control Profiles and Access Rules.

The Security > Access tab contains the following folders:

HTTP Configuration on page 161

Secure HTTP Configuration on page 162

Certificate Download on page 163

Access Profile Configuration on page 165

Access Rule Configuration on page 166

HTTP Configuration

Use the HTTP Configuration page to configure the HTTP server settings on the system.

To access the HTTP Configuration page, click the Security tab, then click Access, and then click the HTTP > HTTP Configuration link.

To configure the HTTP server settings:

1.Enable or disable the Web Java Mode. This applies to both secure and un-secure HTTP connections. The currently configured value is shown when the Web page is displayed. The default value is Enable.

2.In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session can be idle before a timeout occurs.

After the session is inactive for the configured amount of time, the administrator is automatically logged out and must re-enter the password to access the management interface. A value of zero corresponds to an infinite timeout. The default value is 5 minutes. The currently configured value is shown when the Web page is displayed.

3.In the HTTP Session Hard Timeout field, specify the hard timeout for HTTP sessions.

Chapter 5: Managing Device Security 161

Page 161
Image 161
NETGEAR GS724TS-100NAS manual Configuring Management Access, Http Configuration