
GS716Tv2 and GS724Tv3 Software Administration Manual
Interface Queue Configuration
Use the Interface Queue Configuration page to define what a particular queue does by configuring switch egress queues.
The configuration process is simplified by allowing each CoS queue parameter to be configured globally or
To display the Interface Queue Configuration page, click the QoS > CoS tab, and then click the Advanced > Interface Queue Configuration link.
To configure CoS queue settings for an interface:
1.To configure CoS queue settings for a physical port, click PORTS.
2.To configure CoS queue settings for a Link Aggregation Group (LAG), click LAGS.
3.To configure CoS queue settings for both physical ports and LAGs, click ALL.
4.Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply a trust mode or rate to all interfaces.
5.Configure any of the following settings:
Chapter 4: Configuring Quality of Service 131