GS716Tv2 and GS724Tv3 Software Administration Manual
Field | Description |
Log | The sequence number of this trap. |
|
|
System Up Time | The time at which this trap occurred, expressed in days, hours, minutes, and |
| seconds since the last reboot of the switch. |
|
|
Trap | Information identifying the trap. |
|
|
Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the default values.
Event Logs
Use the Event Log page to display the event log, which is used to hold error messages for catastrophic events. After the event is logged and the updated log is saved in flash memory, the switch will be reset. The log can hold at least 2,000 entries and is erased when an attempt is made to add an entry after it is full. The event log is preserved across system resets.
To access the Event Log page, click the Monitoring > Logs tab, and then click the Event Logs link.
The following table describes the Event Log information displayed on the screen.
Field | Description |
Entry | The number of the entry within the event log. The most recent entry is first. |
|
|
Type | Specifies the type of entry. |
|
|
Filename | The GS716T or GS724T source code filename identifying the code that |
| detected the event. |
|
|
Line | The line number within the source file of the code that detected the event. |
|
|
Task ID | The |
|
|
220 Chapter 6: Monitoring the System
