GS716Tv2 and GS724Tv3 Software Administration Manual
Note: You cannot select ports that are not participating in a LAG
2.Configure the LACP Priority value for the selected port. The field range is
3.Configure the administrative LACP Timeout value.
•Long. Specifies a long timeout value.
•Short. Specifies a short timeout value.
4.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.
5.If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately.
Chapter 3: Configuring Switching Information 79
