GS716Tv2 and GS724Tv3 Software Administration Manual
•Destination MAC Mask: 00:00:00:00:FF:FF
•Source MAC: 02:02:1A:BC:DE:EF
•Source MAC Mask: 00:00:00:00:FF:FF
•VLAN ID: 2
For more information about MAC ACL rules, see MAC Rules on page 186.
3.From the MAC Binding Configuration screen, assign the Sales_ACL to Ethernet ports 6, 7, and 8, and then click Apply (See MAC Binding Configuration on page 188).
You can assign an optional sequence number to indicate the order of this access list relative to other access lists if any are already assigned to this interface and direction.
4.The MAC Binding Table displays the interface and MAC ACL binding information (See MAC Binding Table on page 189).
The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC addresses and MAC masks defined in the rule. Also, the frame must be tagged with VLAN ID 2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the default value for Ethernet frames. Frames that match this criteria are permitted on interfaces 6, 7, and 8 and are assigned to the hardware egress queue 0, which is the default queue. All other traffic is explicitly denied on these interfaces. To allow additional traffic to enter these ports, you must add a new permit rule with the desired match criteria and bind the rule to interfaces 6, 7, and 8.
Standard IP ACL Example Configuration
The following example shows how to create an
Appendix B: Configuration Examples 253
