GS716Tv2 and GS724Tv3 Software Administration Manual
Field | Description |
Reference Clock Id | Specifies the reference clock identifier of the server for the last received valid |
| packet. |
|
|
Server Mode | Specifies the mode of the server for the last received valid packet. |
|
|
Unicast Sever Max Entries | Specifies the maximum number of unicast server entries that can be |
| configured on this client. |
|
|
Unicast Server Current | Specifies the number of current valid unicast server entries configured for |
Entries | this client. |
Click Refresh to refresh the page with the most current data from the switch.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page, click System > Management > Time > SNTP Server Configuration.
To configure a new SNTP Server:
1.Enter the appropriate SNTP server information in the available fields:
•Server Type. Specifies whether the address for the SNTP server is an IP address (IPv4) or hostname (DNS).
•Address. Enter the IP address or the hostname of the SNTP server.
•Port. Enter a port number on the SNTP server to which SNTP requests are sent. The valid range is
Chapter 2: Configuring System Information 39
