GS716Tv2 and GS724Tv3 Software Administration Manual
•Supplicant Timeout. Defines the amount of time that lapses before EAP requests are resent to the user. The field value is in seconds. The field default is 30 seconds.
•Server Timeout. Defines the amount of time that lapses before the switch resends a request to the authentication server. The field value is in seconds. The range is
•Control Direction. This displays the control direction for the specified port, which is always Both. The control direction dictates the degree to which protocol exchanges take place between Supplicant and Authenticator.The unauthorized controlled port exerts control over communication in both directions (disabling both incoming and outgoing frames). This field is not configurable.
•Protocol Version. This field displays the protocol version associated with the selected port. The only possible value is 1, corresponding to the first version of the 802.1X specification. This field is not configurable.
•PAE Capabilities. This field displays the port access entity (PAE) functionality of the selected port. Possible values are Authenticator or Supplicant. This field is not configurable.
•Authenticator PAE State. This field displays the current state of the authenticator PAE state machine. Possible values are as follows:
•Initialize
•Disconnected
•Connecting
•Authenticating
•Authenticated
•Aborting
•Held
•ForceAuthorized
•ForceUnauthorized
•Backend State. This field displays the current state of the backend authentication state machine. Possible values are as follows:
•Request
•Response
•Success
•Fail
•Timeout
•Initialize
•Idle
•EAPOL Flood Mode. This field is used to enable or disable the EAPOL Flood mode per Interface.The default value is Disable.
3.Click Apply to send the updated screen to the switch and cause the changes to occur on the switch and the changes will be saved.
172 Chapter 5: Managing Device Security
