GS716Tv2 and GS724Tv3 Software Administration Manual
•Active Ports. A listing of the ports that are actively participating members of this Port Channel. A maximum of 4 ports can be assigned to a port channel.
•LAG State. Indicates whether the link is Up or Down.
3.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.
4.If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately.
LAG Membership
Use the LAG Membership page to select two or more
To access the LAG Membership page, click Switching > LAG > Basic > LAG Membership.
To create a LAG:
1.From the LAG ID field, select the LAG to configure.
2.In the LAG Name field, enter the name you want assigned to the LAG. You may enter any string of up to 15 alphanumeric characters. A valid name has to be specified to create the LAG.
3.Click the orange bar to display the ports.
76 Chapter 3: Configuring Switching Information
