GS716Tv2 and GS724Tv3 Software Administration Manual
Field | Description |
Fast Link | Indicates whether the port is enabled as an edge port. |
|
|
Status | The Forwarding State of this port. |
|
|
Click Refresh to update the information on the screen with the most current data.
MST Configuration
Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST) on the switch.
To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced > MST Configuration.
To configure an MST instance:
1.To add an MST instance, configure the MST values and click Add:
•MST ID. Specify the ID of the MST to create. Valid values for this are between 1 and 4094.
•Priority. Specifies the bridge priority value for the MST. When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the switch with the lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096. If you specify a priority that is not a multiple of 4096, the priority is automatically set to the next lowest priority that is a multiple of 4096. For example, if the priority is attempted to be set to any value between 0 and 4095, it will be set to 0. The default priority is 32768.The valid range is
Chapter 3: Configuring Switching Information 103
