GS716Tv2 and GS724Tv3 Software Administration Manual
•Destination IP Address. Requires a packet’s destination port IP address to match the address listed here. In the IP Address field, enter a valid destination IP address in dotted decimal format.
•Destination Mask. Enter a valid subnet mask to determine which bits in the IP address are significant. This is not a wildcard mask.
•Destination L4 Port. Requires a packet’s TCP/UDP destination port to match the port you select. Select the desired L4 keyword from the list on which the rule can be based. If you select Other, the screen refreshes and a Port ID field appears. Enter a
•IP DSCP. Matches the packet’s DSCP to the class criteria’s when selected. Select the DSCP type from the menu or enter a DSCP value to match. If you select Other, enter a custom value in the DSCP Value field that appears.
•IP Precedence. Matches the packet’s IP Precedence value to the class criteria’s when Enter a value in the range of
•IP ToS. Matches the packet’s Type of Service bits in the IP header to the class criteria’s when selected and a value is entered. In the ToS Bits field, enter a
3.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.
4.If you change any of the settings on the page, click Apply to send the updated configuration to the switch. Configuration changes occur immediately.
5.Click Refresh to refresh the page with the most current data from the switch.
Policy Configuration
Use the Policy Configuration page to associate a collection of classes with one or more policy statements. After creating a Policy, click the policy link to the Policy page.
To display the page, click QoS > DiffServ > Advanced > Policy Configuration.
140 Chapter 4: Configuring Quality of Service
