GS716Tv2 and GS724Tv3 Software Administration Manual
To modify the network settings on your administrative system:
1.On your PC, access the MS Windows operating system TCP/IP Properties.
2.Set the IP address of the administrative system to an address in the 192.168.0.0 network, such as 192.168.0.200. The IP address must be different from that of the switch but within the same subnet.
3.Click OK.
To configure a static address on the switch:
1.Use a
2.Open a Web browser on your PC and connect to the management interface as described in Web Access on page 18.
3.Change the network settings on the switch to match those of your network (this procedure is described in IP Configuration on page 33).
After you change the network settings on the switch, return the network configuration on your administrative system to the original settings.
Chapter 1: Getting Started 17
