GS716Tv2 and GS724Tv3 Software Administration Manual
•Mark IP DSCP. These packets are marked by DiffServ with the specified DSCP value before being presented to the system forwarding element. This selection requires that the DSCP value field be set.
5.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.
6.If you change any of the settings on the page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately.
7.Click Refresh to refresh the page with the most current data from the switch.
Service Configuration
Use the Service Configuration page to activate a policy on an interface.
To display the page, click QoS > DiffServ > Advanced > Service Configuration.
To configure DiffServ policy settings on an interface:
1.To configure DiffServ policy settings for a physical port, click PORTS.
2.To configure DiffServ policy settings for a Link Aggregation Group (LAG), click LAGS.
3.To configure DiffServ policy settings for both physical ports and LAGs, click ALL.
Chapter 4: Configuring Quality of Service 145
