NETGEAR GS724TS-100NAS manual Memory Logs

GS716Tv2 and GS724Tv3 Software Administration Manual

Memory Logs

The in-memorylog stores messages in memory based upon the settings for message component and severity. Use the Memory Logs page to set the administrative status and behavior of logs in the system buffer. These log messages are cleared when the switch reboots.

To access the Memory Log page, click the Monitoring > Logs tab, and then click the Memory Log link.

T o configure the Memory Log settings:

1.Use the radio buttons in the Admin Status field to determine whether to log messages.

•Enable: Enables system logging.

•Disable: Prevents the system from logging messages.

2.From the Behavior menu, specify the behavior of the log when it is full.

•Wrap: When the buffer is full, the oldest log messages are deleted as the system logs new messages.

•Stop on Full: When the buffer is full, the system stops logging new messages and preserves all existing log messages.

3.If you change the buffered log settings, click Apply to apply the changes to the system and the changes will be saved.

214 Chapter 6: Monitoring the System