NETGEAR GS724TS-100NAS manual LLDP-MED Network Policy

GS716Tv2 and GS724Tv3 Software Administration Manual

•Tx and Rx: Enable both transmitting and receiving LLDP PDUs on the selected ports.

•Disabled: Do not transmit or receive LLDP PDUs on the selected ports.

•Management IP Address. Choose whether to advertise the management IP address from the interface. The possible field values are:

•Stop Advertise: Do not advertise the management IP address from the interface.

•Auto Advertise: Advertise the current IP address of the device as the management IP address.

•Notification. When notifications are enabled, LLDP interacts with the Trap Manager to notify subscribers of remote data change statistics. The default is Disabled.

•Optional TLV(s). Enable or disable the transmission of optional type-length value (TLV) information from the interface. The TLV information includes the system name, system description, system capabilities, and port description. To configure the System Name, see Management on page 32. To configure the Port Description, see Ports on page 70.

2.If you make any changes to the page, click Apply to apply the new settings to the system.

3.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.

LLDP-MED Network Policy

This page displays information about the LLPD-MED network policy TLV transmitted in the LLDP frames on the selected local interface.

To display this page, click System > LLDP > Advanced > LLDP-MED Network Policy.

From the Interface menu, select the interface with the information to view. The following table describes the LLDP-MED network policy information that displays on the screen.

Chapter 2: Configuring System Information 55