NETGEAR GS724TS-100NAS manual IP Configuration, Open the System Information

GS716Tv2 and GS724Tv3 Software Administration Manual

To define system information:

1.Open the System Information page.

2.Define the following fields:

•System Name. Enter the name you want to use to identify this switch. You may use up to 31 alphanumeric characters. The factory default is blank.

•System Location. Enter the location of this switch. You may use up to 31 alphanumeric characters. The factory default is blank.

•System Contact. Enter the contact person for this switch. You may use up to 31 alphanumeric characters. The factory default is blank.

3.Click Apply.

The system parameters are applied, and the device is updated.

The following table describes the status information the System Page displays.

Field	Description
Serial Number	The serial number of the switch.
System Object ID	The base object ID for the switch's enterprise MIB.
Date & Time	The current date and time.
System Up Time	Displays the number of days, hours, and minutes since the last system
	restart.
Base MAC Address	The universally assigned network address.
Model Name	The model name of the switch.
Boot Version	The boot code version of the switch.
Software Version	The software version of the switch.

IP Configuration

Use the IP Configuration page to configure network information for the management interface, which is the logical interface used for in-band connectivity with the switch through any of the switch's front panel ports. The configuration parameters associated with the switch's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed.

To access the page, click System > Management > IP Configuration. A screen similar to the following displays.

Chapter 2: Configuring System Information 33