GS716Tv2 and GS724Tv3 Software Administration Manual

To configure TACACS+ server settings:

1.To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the IP address of the server to add, and click Apply.

Note: The Add option is available if fewer than five TACACS+ servers are configured on the system, and the Server Address field is only available when Add is selected in the TACACS+ Server IP Address field.

After you add one or more TACACS+ servers, additional fields appear on the TACACS+ Server Configuration page.

2.In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority.

3.In the Port field, specify the authentication port number through which the TACACS+ session occurs. The default is port 49, and the range is 0–65535.

4.In the Key String field, specify the authentication and encryption key for TACACS+ communications between the GS716T or GS724T and the TACACS+ server. This key must match the encryption used on the TACACS+ server. The valid range is 0–128 characters.

5.In the Connection Timeout field, specify the amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is from 1 to 30 seconds.

6.If you make changes to the page, or add a new entry, click Apply to apply the changes to the system.

7.To delete a configured TACACS+ server, select the IP address of the server from the TACACS+ Server drop down menu, and then click Delete.

158 Chapter 5: Managing Device Security

Page 158
Image 158
NETGEAR GS724TS-100NAS manual GS716Tv2 and GS724Tv3 Software Administration Manual