GS716Tv2 and GS724Tv3 Software Administration Manual

3.To configure DHCP filtering settings for both physical ports and LAGs, click ALL.

4.Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces.

5.Choose the trust mode for the selected port(s) or LAG(s).

Enable: Any DHCP responses received on this port are forwarded.

Disable: Any DHCP (or BootP) responses received on this port are discarded.

6.Click Apply to apply the change to the system. Configuration changes take effect immediately.

7.Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch.

Chapter 2: Configuring System Information 67

Page 67
Image 67
NETGEAR GS724TS-100NAS manual GS716Tv2 and GS724Tv3 Software Administration Manual