Polycom VSX Series manual Go to this screen Configure these settings Monitors, Record Source

Customizing the VSX System

To configure VCR/DVD video settings for recording a call:

Go to this screen:	Configure these settings:
Monitors	Choose a setting for Monitor 2.
System > Admin Settings > Monitors >	When Monitor 2 is set to Off, you can
Monitors	specify which video sources to record.
	When Monitor 2 is enabled, the VCR or
	DVD player records what is shown on
	Monitor 1.
Monitors	Select one or more sources for the VCR
System > Admin Settings > Monitors >	Record Source.
Monitors > Next	If you select both near and far, the VSX
	system automatically switches
	recording to the site that is talking. If
	you select content as a record source, it
	is recorded (when available) regardless
	of who is talking.

The VSX systems cannot be configured to simultaneously record content and show it on the VGA output of a VSX 7000e, VSX 8000, or attached Visual Concert VSX.

To configure VCR/DVD audio settings for recording a call:

Go to this screen:	Configure these settings:
Audio Settings	Clear Enable Polycom
VSX 6000, VSX 7000	StereoSurround. When
System > Admin Settings > Audio >	StereoSurround is enabled on a
	VSX 6000 or VSX 7000, the system
Audio Settings
	cannot record audio from a call.
Audio Levels	Set Line Outputs to VCR - Far and
VSX 6000, VSX 7000	Near Audio. When StereoSurround is
System > Admin Settings > Audio >	enabled on a VSX 6000 or VSX 7000,
	the system cannot record audio from a
Audio Settings > Next > Next
	call.
VCR/DVD	Adjust the VCR/DVD Out Level if
VSX 7000s, VSX 7000e, VSX 8000	necessary.
	Enable VCR/DVD Audio Out Always
System > Admin Settings > Audio >
Audio Settings > Next > Next	On unless you have the VCR/DVD
	inputs and outputs both connected to
	the same device to play and record.

4 - 19