Polycom VSX Series manual Setting Up, Select Dual Monitor Emulation Using in a Call, Call connects

Customizing the VSX System

Using Dual Monitor Emulation

Dual Monitor Emulation is designed for rooms or offices with one monitor only. Users see both near and far sites on one monitor in two different views. During presentations, users see content and the near and far sites. What you see during a call can depend on factors such as the VSX system monitor configuration, the number of sites in the call, and whether content is being shared.

Setting Up

Using the monitor controls, select the full-screen setting that stretches the picture uniformly, without clipping. On the VSX system Monitors screen:

1.If you are using a wide-screen monitor, set Monitor 1 to 16:9. Otherwise, set Monitor 1 to 4:3.

2.Set Monitor 2 to Off to show near and far video on Monitor 1.

3.Select Dual Monitor Emulation.

Using in a Call	Far site	Near site
The following are examples of dual
monitor emulation.
Call connects
Near and far site are the same size and
appear side by side.

Near site presses PIP

Size of far site window increases.

Near site presents to far site

Content, near site, and far site are displayed in dual monitor emulation mode.

During calls using Dual Monitor Emulation without content, users can press the PIP button on the remote control to scroll through the following screen layouts:

1.Near and far sites, same size, side by side

2.Far site big, near site small

3.Near site big, far site small

4.Near site, full screen

5.Far site, full screen

The last layout viewed is used for the next call.

4 - 11